Home High Security and Challenge Locks (568) Challenge Lock #3 from Rallock67 & my racing thong…

(568) Challenge Lock #3 from Rallock67 & my racing thong…

5.27K
20

LockLab is Fan funded!  Help pay for stuff to review, break and talk trash about, and maybe even give away when we’re done.  Join the Tribe!

My vises are made by Panavise, a U.S. Company.  The one with the wide jaws is the model 350.  The smaller one is the model 301. Both have the 312 Base mount – www.panavise.com

 

Comment(20)

  1. Nice picIking Bill. Yep that is a very used Titan cylinder.
    I didn't know you didn't have a "kwikset" follower but you usually didn't pick them; I can send you one in the Schlage box I'm working on. The reason I put the message over the pin retainer is that all the upper chambers ar threaded also. The standard driver pin goes in first chamber so you can't see any serrations on upper pin.
    Michael DeRose, Titan and UltraMax have 6 pins and use a KW10 key. Some engineer figured they had just enough room to put a sixth pin between the shoulder and first cut of a standard kwikset key.

  2. If you can find the Kwikset follower that comes in the pin kit, it has a tapered end on the inside that fits the protrusion on the back of the plug.

Comments are closed.

WP Facebook Auto Publish Powered By : XYZScripts.com