Home High Security and Challenge Locks (601) Locks from The Tactical Locksmith

(601) Locks from The Tactical Locksmith

51.18K
30

LockLab is Fan funded!  Help pay for stuff to review, break and talk trash about, and maybe even give away when we’re done.  Join the Tribe!

My vises are made by Panavise, a U.S. Company.  The one with the wide jaws is the model 350.  The smaller one is the model 301. Both have the 312 Base mount – www.panavise.com

 

Comment(30)

  1. know why he put the two medeco's to the side? and the reason your following tool didnt' work because it's the wrong one. Master lock has it's own tool. It is flat on one side to allow for the flat side of the cylinder. 

  2. My boss gave me an old pay phone with Medeco upper and lower locks no keys can it be bumped, picked or drilled? What is the best way to get into it without destroying it?  I want to use it in my home. Thank you.

  3. Hi Bill. I'm new around here, nice videos you have here. I noticed you said on a vid that those chinese demagnetizer don't work. Well you can get a shaded pole motor, it has a piece of thick copper wire coiled on the metal core, near the rotor. Just remove the rotor from the core, put what you want to demagnetize in there and hold, turn the motor core on, wait 10 second and remove the object from the core pulling away some inches, a feet… Turn off. The metal object will be demagnetized. If you wanna magnetize, put a diode in series with the motor. This diode will have to handle the current and voltage. 1N5408 is an example.

  4. Welcome back Bill! A non-lock related question; Do you know the brand of you folding box cutter? Is it like the other knives a premium knife (Benchmade, Spyderco)? Or a simple off-the-shelf thing?

Comments are closed.

WP Facebook Auto Publish Powered By : XYZScripts.com